The TK-110INS 11 Piece Insulated Tool Kit is the perfect kit for Tech Professionals and Electricians. It contains 11 tools, screwdrivers and pliers, packaged in a convenient rugged tool case. The pliers are made from 60 CRV (chrome vanadium steel) for durability and long life. The cutting edges are strengthened using high frequency induction hardening for superior strength. The high leverage design provides superior cutting ability, and the rivets are made of 40 CRV (chrome vanadium steel) for toughness and to minimize side play. Guards are integrated into the dual color TPE plastic handle design to prevent contact with conductive parts while the soft ergonomic grips meet and exceed applicable IEC (IEC 60900) and VDE standards for high voltage protection. Tested to 10,000 VAC and rated to 1,000 VAC live use.
The kit includes:
INP-1072 Lineman’s Combo Plier 7 1/4″ Insulated
INP-2065 Long Nose Plier 6 1/2″ Insulated
INP-3062 Diagonal Plier 6 1/4″ Insulated
INP-4065 Wire Stripper 6 1/2″ Insulated
INS-180 #1 X 3 Phillips Screwdriver Insulated
INS-2100 #2 X 4 Phillips Screwdriver Insulated
INS-3150 #3 X 6 Phillips Screwdriver Insulated
INS-4100 5/32 X 4 Slotted Screwdriver Insulated
INS-475 3/32 X 3 Slotted Screwdriver Insulated
INS-6150 1/4 X 6 Slotted Screwdriver Insulated
INS-8175 5/16 X 7 Slotted Screwdriver Insulated
* TKC-110 Rugged Nylon 11-Pocket Tool Case Included
These screwdrivers are made 60 CRV (chrome vanadium steel) for strength and durability and insulated to IEC 60900 Standards for hazardous work environments. Tools are tested to 10,000 VAC and rated for 1,000 VAC live use. Handles are made of dual color TPE plastic and the tips are magnetic.
Tools are not recommended for use on energized circuits. Work should only be performed by qualified professionals. Do not use this tool if the insulation becomes damaged in any way. Tools must be kept clean and dry. Always inspect before use. Do not touch the uninsulated portion of the tool or any conductive object when either might make contact with an energized source. Always wear approved eye & clothing protection. Only use tools for their designed purpose and always follow OSHA 1910.333 (c)(2) and NFPA 70E 2004 when doing electrical work. Failure to observe proper safety precautions may result in serious injury or death.
